In the injection mold, it is often necessary to use the release agent to release the mold, so that it is easy to release between the mold and the product without other cleaning problems. The injection release agent is generally used in the release of the injection mold. In some cases, oily release agents need secondary processing, so we can not choose oily release agents that affect the secondary processing, but dry or ultra-dry release agents. The choice of release agent is also different, so what are the performance phenomena often encountered in injection mold release agent? Let's take a look at it together:
The main results are as follows: 1. For polymer release agents, the common phenomenon is that the demoulding times are not ideal and the demoulding persistence is not good.
2. For metal die casting release agent, carbon deposition and adhesion occur from time to time. Rubber, plastic and other release agents, after adding water, the whiteness is not ideal.
3. The release agent is often adhered to the formed product, which affects the re-production operation of the processed product.
4. sometimes the high temperature resistance is not up to standard and the chemical stability is not strong. The residual chemicals on the mold machinery are obvious and not easy to remove.
Shandong Huirun Ruike New material Co., Ltd. specializes in producing vulcanization isolators (release agents) for rubber tires, rubber products and friction materials. at present, the products include film isolator, capsule isolator, mold release agent, tire modifier, inner (outer) spray agent, etc., which are suitable for the vulcanization isolation of radial tires, black tires and rubber miscellaneous parts, rubber inner tubes and friction materials. In recent years, radial tire isolator (internal and external spraying), mold release agent and new capsule isolating agent have been widely used because of their low cost and high quality.
鲁公网安备37070402000210号 
