Bladder Coating Protective Agent is a kind of film-forming, long lasting effective Bladder Pre-treatment Protective Agent, which has thermal crosslinking property. The product could form a dense, wear-resistant and elastic isolation film by heating on the surface of the Bladder Capsule. The coating film could prevent   oxygen erosion to the Bladder Capsule during the storage and vulcanization process. Bladder Coating Protective Agent could improve application efficiency and prolong Bladder live. The product provide more than 50 times of demolding cycles, even if no other demolding aids are used, which can effectively prevent the  capsules sticking to the inner surface of tires during vulcanization.

Before using the capsule protector, it is necessary to clean the capsule thoroughly. The protective coating agent could be sprayed or brushed evenly on the capsule, and then conduct heat treatment (it is recommended to bake the film at 170 ℃ for 40 min). After heating treatment, a thin white cross linked film is formed on the surface of the capsule, which can achieve multiple demolding, protect the inner liner joint.

Tire industry.

Bladder Coating Protective Agent is a kind of film-forming, long lasting effective Bladder Pre-treatment Protective Agent, which has thermal crosslinking property. The product could form a dense, wear-resistant and elastic isolation film by heating on the surface of the Bladder Capsule. The coating film could prevent   oxygen erosion to the Bladder Capsule during the storage and vulcanization process. Bladder Coating Protective Agent could improve application efficiency and prolong Bladder live. The product provide more than 50 times of demolding cycles, even if no other demolding aids are used, which can effectively prevent the  capsules sticking to the inner surface of tires during vulcanization.

Before using the capsule protector, it is necessary to clean the capsule thoroughly. The protective coating agent could be sprayed or brushed evenly on the capsule, and then conduct heat treatment (it is recommended to bake the film at 170 ℃ for 40 min). After heating treatment, a thin white cross linked film is formed on the surface of the capsule, which can achieve multiple demolding, protect the inner liner joint.

Tire industry.